Tamiya 1/24 Nissan Calsonic Impul GTR (R35)

The Car:

Calsonic blue dragster common vision about the Japanese GT championship tournament, which started back in 1993. Nissan GT - research 4.5L DOHC V8 engine is located low in the front, and the power to be transmitted to the rear transaxle. A car body panels, especially the carbon fiber body panels provide a more aerodynamic form to change the different track conditions. Car show in 2008, s Impul team input 'to 1000K at Suzuka Super GT Fuji speedway races. Although less than good weather and mechanical problems, the team won the flag diligence and skill in driving time.

Accessories:

[Review] brand with information Modelers Model Kit Tamiya half-jokingly says that if you open bpíopa and paste in place and closed box model with the spirit and excitement of the box, put an end models will appear in an open box. Urban legends around the building to facilitate the engineer equipment Intelligent Tamiya Tamiya and unusual ways to package. Special attention is always on the place and method of assembling a format that can provide the level of skill modelers to produce precise miniature. Urban legend true especially for this building was held.

Equipment that is more or less set the path or model, which means that the engines. However, designed so that the plastic pin page with 'intelligent in the room of two removable panels that can be disguised to remove Chassis bodywork / internal connecting tub. When you see your body up front and rear suspension and engine exhaust domestic front tank is connected to the bathroom.

Company:


[In review] to open the box large enough, I gt - 1/24th scale study is surprising body, physically large car! Everything comes in a separate complex of poly bags for everything bright and beautiful part of the horses free cream. I confess that I race in Tamiya cars are not long, so I spent more time auditing than usual and familiar tool bag and 20 degrees direction. Machines can challenge you to Decaling bit, when I as more than 100 decals and transfers in this package there. Nine separate implementation phase of the engine 26 decals nose, he can "CALSONIC" name and carbon fiber air vent before the body decals.

I began to recognize the parts of construction and assembly Tamiya TS44 painted bright blue, (Calsonic blue) and TS29 Black Semigloss, they can have a big spraeála varnish paint over the line. Light blue, the body needs to remove at least before the online image formats, and at that time but a series of TS44 to beauty. Many vehicles, except on a few things in the pilot's cabin a half-gloss, glossy black and white together. I shoot everything in sorghum and then spraeála - black and white and fits firmly over Tamiya gloss black and white and fair. Pilot cabin and very little contact with the outside paint, decal decals and location advantages. Separated from the beginning in the equipments which include photos, but the additional cost is likely that some of the hardware proved beyond detailer.

Tamiya equipment back to the Urban Myth, the problem I stumbled on the building, focused on the problem, others may take this equipment to help collect. Steps 1 and 3 now coscaithe wheel rotor assembly to maintain the cup is attached to the suspension members; wheel assembly and the State coscán came through the disk and the cup is then stored. Defense cup nestles Slot suspension of any kind, either. [In review] However, no special instructions and can connect to the rotor cup assembly points. If the rotor and plated nine cups, the wheels will slide on the hole. I discovered the hard way and had to be cut from the rotor to get on the wheel, because the misalignment in this meeting, the result is that the views of small cars. Way easier and more accurate if you follow the build and cement the complete assembly together when using the wheel as a guide for proper alignment. The World Cup is designed to keep the wheels turning. In addition, there are no other problems with the assembly and enclosed places.

Equipment decal Review:

Kit contains more than 100 decals decals in two pieces. Replication machinery in 2008 in Japan, Super GT series run. Endurance race, with two drivers per car and back out during the race, is the driver name (Tsugio Matsuda and Sebastien Philippe) into account. The car that won it two times a year at Suzuka and Fuji, and every race to be little difference in the site properties, but not race specific instructions recorded on the decal is recommended.

decals performed very, very clear and the color print. Small people can not afford high-decal near each other to cut decal. A very blurry; blue and white decals fully closed. Many placement is very simple, but Calla letters on the front of Calsonic is actually comprised of 17 individual pieces as, louvers must open the front Calla. Responses, such as assembly, but starting in the middle and towards the outside does not work. Do not worry, instructions, such as individual pieces that will continue to look for anything until the machine. In some decals for the dashboard instruments there. Seat belt and about five separate pieces.

Decals are also some other properties as well as the logo image side mirror before the light scratches layered body of their own adhesive. Slide decals and signs are rubber stencil than water. All signs continue without problems as well.

Conclusion

I am total agreement with the general results of the Tamiya model car equipment happy. In addition to issues mentioned in the review build, equipment build a realistic replica of the real and Car Racing In addition, Welcome to the collection.

AMT 1/24 2006 Camaro Concept Car

Camaro Concept Amt. In my opinion, always worked for General Motors, the car was released in March 2009, as the Camaro in 2010.

This is a new toy, I saw the box on my desk for a while ', then opened, the pieces of verification, and found that the AMT is done entirely new post and the big, the parts have been replaced by a different bag worn bag and causing the tire decals or problems clear, they all bagged separately as well. Nice!

I found a bag with a frame and shell. I found that the shell with a decal and laser in the frame ID has increased production trains needed sanding frame. The first thing I do is wash the pieces in the old Dawn dishwashing detergent with a toothbrush to remove mold release, and print, and then left soaking in the dishwasher until the day after he admitted RACK plate dry air.

On the way home the next day I was very lucky, as the owner of a local body shop actually buy one of his men, and displayed in front of the store. New metallic orange paint, white Calla stripes, similar to the '68 version, usually with Chevy orange paint in silence. I had better luck in the research and found that the local dealer, that my father and I have two vehicles purchased from, also has a red coat and a diamond-hard metal, I'm better off with them, e - mail me some pictures of cars on online web is used as a reference, give me to show them the finished model, and if printed copy is available for them, to appear in the dealers, who initially did not believe that other modelers for modelers to review that information about the equipment, and purchases.

In doing my research, and related to the physical machine, I found a major deficiency with other papers guests, but the correction was published in one of the local lines to harvest for the lights to the tail. The site is located on the panel at the bottom of the trunk line, which met with fiberglass bumper, then the top of the previous model's tail light.

Priming / sanding / polish Paint plastic Questions

After drying, the shell that I have on my Tamiya paints, and sprayed the shell with Dupont Vari-Prime Primer Part 2, which I use for almost 15 years ... It dries flat and can be Retouched, or use a little touch-up HVLP gun spraeála, if the compressor can accommodate.

After allowing the primary to sit a few days, I took the soap and water began with 4000 and 6000 and then refined the model and remove the mold lines and 9 is that 9 points should be injected on top of the peg to hold the glass in place.

Martin AM-1 Mauler

FirstLook

Siga is a relatively new company from the Ukraine that produces limited-run model kits. Unlike some recent releases of kits including MPM's Wellington or Classic Airframes' latest offerings, Siga's models are the product of a less sophisticated moulding process using fairly soft plastic, resulting in some soft detail, flash on many parts and reasonably thick sprue attachment points.

Having said that, my overall impression of Siga's 1/72 scale Martin AM-1 Mauler is very good indeed.

The kit comprises 80 parts in white styrene and one in clear styrene for the aircraft itself, and a further 97 parts for the ordnance options. The white plastic is quite soft and thick in places, but Siga has managed the limitations of the moulding process so that trailing edges of flying surfaces are acceptably thin and recessed panel lines are crisp and consistent. The overall shape of the aircraft looks good too.

---

Some nice touches include optional style propeller blades and spinners; and separate pieces for the side cowl flaps, lower cowl flap and lower mid-fuselage speed brake. Wheels and wing guns are fairly awful, but an average modellers "spares box" should provide some assistance in these areas. The cockpit is sparsely detailed with decals supplied for side consoles and the instrument panel, however the two-piece seat looks okay.

The clear canopy is supplied in one piece, and is not exactly sparkling. We can hope that Squadron or Falcon will release a vacform replacement for this part.

Ordnance options include Mk 13-2 aerial torpedos, 750 lb bombs, 250 lb bombs, AN/APS-4 search radar pod, 11/75" Tiny Tim rockets, 5" HVAR ground attack rockets and launchers.

These parts come with their own detailed painting, placement and assembly instructions.

The kit instructions are straightforward, as befitting the simple engineering of the model.

Three decal options are offered. The marking options offer any colour the modeller might want, as long as it is overall Gloss Sea Blue! Splashes of colour are available with green fin and spinner tips on one option.

Revell 1/25 2007 Shelby GT-500

Shelby and the horse in a relationship, going back to the 1960s. From that date, the name of the retention of the label and Shelby cars, which meant a serious thing. 2007 Shelby GT -500 name is the most powerful car in the back. The last turbocharger, 5, 4 liters, 32 - V 8-valve 500 horsepower, which is enabled. Even the Chevy fan, like me, to Garners respect!

Revell 2007 GT and 2006 GT 500 horses, before such a new hood and exhaust upgrade its housing stock, if necessary, a new body (the Cobra symbol) and the required output in meetings engine (supercharged Sun -8) to -- 500 GT. Includes two color Racing Stripes is a factory sticker sheet.

Who detailed the new Revell kit is the same. Includes behind the casting, such as the rear lamps with fine detail. Parts molded in white, black and silver light. Includes chrome-plated parts and vinyl tires. More is better has a metal exhaust tips Revell. Once these models are looking very good!

These simple instructions and photos Revell typical 14-meter line is also built. No problem occurred during construction.

Building for no apparent problems or Flash. A few pin marks, but in most areas of the above (except bonnet), the better. He says two things, though. The setting, on the windscreen. The body is subject to, and it can be shown as a slide from the top would be required. Second, disruptions and is not part of the trunk is full of what is to be progress. I saw the following highway. Tduprant was not easy.

This is perhaps the most difficult task that sticker. This is very bad, but the fact that the increase is mainly stickers and many other functions of the body's curves and is not rooted. I cut the sticker, though late. In addition, to lie down and respond very well resolve correctly.

This is a great set of a live model. I can recommend, and if children, they have a 1 / 32 Snaptite version that you know the little ones. I thank you for your review Revell kit jingling and Joyce!

Introduction

This site tries to be a forum for fans of model kits, both beginners and the already excellent, both from fans armor, aircraft, cars, motorcycles, gundam, and other categories to be able to share information, tips, techniques, procedures, or simply to showing of his work here.

That way, expected to create a good interaction between the model kit fellow fans . In addition, this site also offers personal blogs, photo galleries, advertising columns, forums, events, etc., to be dimaksimisasi by his own colleagues.

Whether you are new modelers learn, or even proficient, let's join and share information